Process Indicators

Trans-KEY.DISP Manual and Remote Start Unit with Key Switch

Over / Under Voltage protection
Suitable for Diesel or Gasoline engine
Selectable Generator, Pump and Fire Pump applications
Engine working hour counter for Trans-KEY.DISP model
Parameter configuration via RS-232 serial communication
Configurable Fail Safe mode

Trans-MiniAUTO++ Automatic Genset Controller

Canbus J1939 ECU communication
Log last 50 events & alarm information with measured values
Statistics records
Power factor measurement for 3 phases
Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc..
SPN, FMI and OC values reading from engines via J1939

ESM-3712-HCNDigital ON / OFF Temperature Controller(ALARM+SET)

Installing parameters using Prokey
2 Output for compressor and alarm controls
Process Set value and Alarm Set value low limit and
set value high limit boundaries
4 Digits Display
NTC Inputor PTC Input (Must be determined in order)
ON/OFF temperature control
Selectable heating or cooling function
Selection of operation with hysteresis
Adjustable temperature offset
Alarm parameters
Adjustable internal buzzer according to Sensor
prob defect and Alarm status
Remote access, data collecting and controlling
with Modbus RTU (Optional)

Trans-485RS-485 Serial Communication Module

Easy plugging to all Trans Series controllers, RS-485 serial ModBus communication, Call-Back selection by Serial network, Maintenance management of multiple Gen-Sets from a central computer, Alarm observation and archive, Easy adjustable ID adress, Max. 247 device can be add on serial network, 500V galvanic insulation