Trans-AUTO

ESM-3712-HCNDigital ON / OFF Temperature Controller(ALARM+SET)

Installing parameters using Prokey
2 Output for compressor and alarm controls
Process Set value and Alarm Set value low limit and
set value high limit boundaries
4 Digits Display
NTC Inputor PTC Input (Must be determined in order)
ON/OFF temperature control
Selectable heating or cooling function
Selection of operation with hysteresis
Adjustable temperature offset
Alarm parameters
Adjustable internal buzzer according to Sensor
prob defect and Alarm status
Remote access, data collecting and controlling
with Modbus RTU (Optional)

The EL7-ECS servo represents Leadshine's latest generation EL7 AC servo drive, with a Speed Loop Bandwidth up to 3.5 kHz.

Operating within a power range of 400-7500W, its key features include:safety compliance, with control power circuit and main power circuit separated. New LTune Intelligent Tuning function. The minimum communication data update cycle has been reduced from 250 to 62.5 µs, enabling faster response times and more precise trajectory control. It meets STO and UL certification requirements. Main applications encompass photovoltaic systems, lithium battery manufacturing, semiconductor production,robotics,electronics,laser technology and so on.

• Servo drive with rated power range from 400W to 2000W
• General-purpose debugging port: USB Type-C Tuning
• User-configurable I/O: 4 digital inputs, 3 digital outputs, 2 high-speed probe inputs
• Built-in regenerative resistor
• Standard: STO supported
• Supports PP, CSP/PV, CSV/PT, CST/HM mode control
• Servo functions: Model Following Control (MFC), vibration suppression (mechanical resonance and end vibration), friction compensation, position comparison and new LTune function: realize parameter-free auto-tuning .
• Dual-power independent supply: control circuit and main circuit isolated
• Matching motors with rated power range from 50W to 2000W
• Motor encoder: 23-bit magnetic/optical encoder(support battery-free encoder)
• Optional: Holding brake

Trans-MiniATSAutomatic Transfer Switching Controllers

Parameter configuration via RS-232 serial communication
Log last 50 events & alarm information with measured values
Statistics records
Remote Start/Stop output
Mains voltage failure detection
Emergency backup and Test mode

The EL7-ECS servo represents Leadshine's latest generation EL7 AC servo drive, with a Speed Loop Bandwidth up to 3.5 kHz.

Operating within a power range of 400-7500W, its key features include:safety compliance, with control power circuit and main power circuit separated. New LTune Intelligent Tuning function. The minimum communication data update cycle has been reduced from 250 to 62.5 µs, enabling faster response times and more precise trajectory control. It meets STO and UL certification requirements. Main applications encompass photovoltaic systems, lithium battery manufacturing, semiconductor production,robotics,electronics,laser technology and so on.

Trans-MiniAUTOAutomatic Genset Controller

Log last 50 events & alarm information with measured values
Statistics records
Power factor measurement for 1 phases
Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc..
Engine control
Compatible to Diesel or Gas generators
SPN, FMI and OC values reading from engines via J1939