ESM-9910

ESM-3712-HCNDigital ON / OFF Temperature Controller(ALARM+SET)

Installing parameters using Prokey
2 Output for compressor and alarm controls
Process Set value and Alarm Set value low limit and
set value high limit boundaries
4 Digits Display
NTC Inputor PTC Input (Must be determined in order)
ON/OFF temperature control
Selectable heating or cooling function
Selection of operation with hysteresis
Adjustable temperature offset
Alarm parameters
Adjustable internal buzzer according to Sensor
prob defect and Alarm status
Remote access, data collecting and controlling
with Modbus RTU (Optional)

The EL7-ECS servo represents Leadshine's latest generation EL7 AC servo drive, with a Speed Loop Bandwidth up to 3.5 kHz.

Operating within a power range of 400-7500W, its key features include:safety compliance, with control power circuit and main power circuit separated. New LTune Intelligent Tuning function. The minimum communication data update cycle has been reduced from 250 to 62.5 µs, enabling faster response times and more precise trajectory control. It meets STO and UL certification requirements. Main applications encompass photovoltaic systems, lithium battery manufacturing, semiconductor production,robotics,electronics,laser technology and so on.

Trans-GPRSTrans-Series GPRS Commumication Module

Easy plugging to all Trans Series controller,Gprs commumication, Alarm observatio and archive, DHCP supported, ModBus over TCP/IP comminication protocol, 2G, 2G5 EDGE supported, Suitable for telecommunication projects, GPRS antenna included With Gen-Agent,Multiple GenSet visualisation & control SCADA Software

Trans-Midi AMFAutomatic GenSet Controller with Transfer Switching

Log last 50 events & alarm information wiht measured values
Statistics records
Mains & Generator phase sequence control
Selectable Resistive sender types; Pt-100 VDO, US, GM, Ford, Datcon, etc...
CanBus J1939 ECU communication
SPN, FMI and OC values reading from engines via J1939
Remote Start/Stop Speed and Idle mode Control via J1939
Local Remote Control and Visualisation function